High Pressure Laminate
Zhongtian Polybett® High Pressure Laminate is a structural panel faced with one side decorative surface. It is widely used for furniture tops especially on flat surfaces of MDF.particle board.plywood board,ect., including cabinet. tables.wall panels.worktops and furniture ect.
High Pressure Laminate is one of the most preferred choices for surfaces like countertops,door and funiture ect.It performs well in high traffic zones like commercial interiors,office funiture,hospital,healthcare,education and retail.
Coloured paper impregnated with melamine resin
Layers of kraft paper impregnated with phenolic resin
1220*1830(4'x6'), 1220*2440(4'x8'), 1220*3660(4'x12')
Thickness range: 0.6mm-3mm
Kitchen Cabinet/ Counter Top/ Table Tops/ Benches
Leisure centers/ Swimming pools/ Gyms/ Healthcare center/ Hospital/ Airport
Supermarkets/ Schools/ Offices/ Hotels/ Pubs/ Restaurants/ Bars/ Museums
Washroom/ Toilet / Kitchens / Restroom/ Dining room/ Bedroom/ Changing Room/ Spas
Wash it with a soft, clean cloth and mild soap, rinse well with water, dry, and the finish will last for a long time. If a stubborn stain persists, the laminate can be cleaned by wiping with 409 Formula All-Purpose Cleaner, Windex and Isopropyl Alcohol.
High Pressure Laminate is lifted vertically to avoid scratching.
It is better to use the vacuum chuck to lift the boards.
During the storage and transport, high pressure laminate should be placed on the plate whose size is slightly larger than boards.
A plate should be placed between the pallet and the boards and a cover plate should be put above the boards.
High pressure laminate could not be stored near the door.
High pressure laminate could not be stored in a too wet or hot environment
High pressure laminate should be placed at least 72 hours before being processed or installed, so the sheet and the environment could achieve the balance.